Archive for November, 2017

Rigging Training – What Do You Need to Learn?

Free Technical Stuff


Rigging training gives you some of the most important skills you need to learn when operating heavy machinery. The safety comes first and foremost when you are an operator, as you may know. Properly learning how to rig heavy machinery can prevent hazardous accidents from occurring, thousand of dollars in damages, and law suits and job loss. It is a serious part of the training that you should get when you're going to be a heavy machines operator, and one of the first things any company will teach you.

As a heavy machine operator, you have many duties and a lot of things can go wrong. This is why you must have a lot of training to ensure that you are qualified for the position. There are many things that can go wrong while operating heavy machinery, and rigging training aims to cover all of the areas that could possibly go wrong.

Some aspects of training

1) Probably one of the most harmful hazards in crane procedures is the accidental drop. "Position load" is easily the most standard reason for these accidents. This happens when you find issues with the position from the load and also the ground. The very best policy would be to keep your position under 10% and ideally at zero. When the position surpasses 10% the burden can slip leading to an accidental drop.

2) A vital aspect of rigging training is learning how to choose the correct equipment, wires and routes. Wire slings have to be looked over for worn wires, the fines for corrosion and breakage, kinks, crushed wires and relaxing strands. Chain slings are utilized with very heavy loads and when it's hot because hot temperatures do not damage them very easily. When utilizing a sling make sure to look into the places that metal rubs metal to search for possible damages from the rubbing.

3) Metallic mesh slings can be used with loads which have sharp edges because they do not cut them as quickly. Plus, the big top of the mesh creates high weight-bearing capacity. An artificial sling is easily the most flexible sling and it is used when loads have to be protected against damage because of sensitive surfaces. Their versatility also reduces stress and harm to rigs.

90% of crane accidents occur because of human error. Crane and rigging operators have 1000's of dollars in equipment and inventory together with the lives of co-employees in their hands. Proper crane safety and rigging safety training is imperative in each and every place of work that utilizes this equipment.

I hope this article was helpful and informative in explaining to you why heavy machine operators and crane operators need to have intensive rigging training before they are on the job. At the end of the day, these companies have to watch out for their best interests, as well as the safety of everyone involved.

Being a crane operator has many benefits, and the pay is pretty good. After you complete your training, you will become a valuable asset to the company you work for. With rigging training, you will be an important member of the team, good luck to you!

Source by Daniel S Frater

Types of Construction Projects

machine learning articles


Construction is defined as “a process that consists of the building or assembling of infrastructure.” (See 1. below) On the other hand, a Construction Project “includes all material and work necessary for the construction of a finished structure for occupancy by End Customer. This includes site preparation, foundations, mechanical, electrical work, and any other work necessary to complete the project.” (See 2. below)

There are different types of construction projects:

  1. Residential
    Residential construction projects include houses, townhouses, apartments, condominiums, cottages, single unit dwellings and subdivisions. The housing designs are generally done by architects and engineers and the construction is executed by builders who hire subcontractors for structural, electrical, mechanical and other specialty work. This type of project must conform to local building authority regulations and codes of practice. Many new builders are attracted to residential projects because of its ease of entry in the real estate market. This makes it a highly competitive market with potentially high risks as well as high rewards.
  2. Building
    Building construction is perhaps the most popular type of construction project. It is the process of adding structure to real property. Most of the projects are room additions and small renovations. Most new building construction projects are construction of sheltered enclosures with walk-in access for the purpose of housing people, equipment, machinery or supplies. It includes installation of utilities and equipment.
  3. Institutional and Commercial
    Institutional and commercial building construction covers a great variety of project types and sizes such as hospitals and clinics, schools and universities, sports facilities and stadiums, large shopping centres and retail chain stores, light manufacturing plants and warehouses and skyscrapers for offices and hotels. Specialty architects and engineers are often hired for designing a particular type of building. This market segment has few competitors because of the high costs and greater sophistication of institutional and commercial buildings as compared to residential construction projects.
  4. Industrial
    Industrial construction is only a small part of the whole construction industry nevertheless it is a very important part of the industry. These projects are generally owned by big, for-profit industrial corporations such as manufacturing, power generation, medicine, petroleum, etc.
  5. Specialized Industrial Construction
    This type of construction project usually involves very large scale projects with a high degree of technological complexity such as nuclear power plants, chemical processing plants, steel mills and oil refineries.
  6. Highway Construction
    Highway construction involves the construction, alteration, or repair of roads, highways, streets, alleys, runways, paths, parking areas, etc. It includes all incidental construction in conjunction with the highway construction project.
  7. Heavy Construction
    Heavy construction projects usually involve projects that are not properly classified as either “building” or “highway.” Examples of this type of project would be: water and sewer line projects, dams, sewage treatment plants and facilities, flood control projects, dredging projects, and water treatment plants and facilities.

These are the more popular types of construction projects. Construction is a big industry and there are now several construction companies that you can choose from. This, coupled with the use of the internet, has made it easier for the consumer to make a decision on how to proceed with his or her projects. You just need to do a little research. Don’t hesitate to contact these construction companies and ask questions. Construction projects are a major undertaking and you need to make the right decisions when you embark on these projects.



Source by Grace F. M.

Which Scrapbooking Machine Should You Choose?

Free Technical Stuff


If you are considering buying a cutting machine to enhance your crafting projects, you have probably noticed there are a wide variety of machines from which to choose. How do you decide which machine will be the best for you? Price, of course, is the biggest determining factor, but where do you go after that? Do you want a manual machine or an electronic system? Do you want to purchase individual dies, cartridges with multiple images, or do you want the extreme versatility of a computer based machine? Here are a few facts about the types of cutting machines available.

Manual Die Cutting Machines

Manual cutting machines require no electricity and are operated by hand. They are the least pricey of your options. Some of the manual cutters include the Cuttlebug, the Sizzix, and the Quickut Squeeze or the Quickut Revolution. You will need to buy individual dies for these machines, one for each shape you want to cut. The Cuttlebug, one of the newest models of manual cutters, will use dies from most manufactures and has a nice embossing feature. Both the Cuttlebug and the Sizzix will cut fairly thick materials like chipboard, fun foam and felt. The Sizzix, however, is one of the oldest die cutting machines available and is limited to one or two fonts. All of these units are portable for taking along to crops or vacations.

Electronic Cutting Machines

You can choose electronic cutting machines that stand alone or ones that require the use of a computer. The Cricut and the Cricut Expression do not need to be plugged in to the computer. These machines use cartridges designed specifically for these machines. Each cartridge much be purchased separately but contains multiple images. There is optional software available for the Cricut if you want to supplement the versatility of these systems.

There are several computer-based models available for home use, including the Quickz Silhouette, Xyron Wishblade, and Craft Robo. All three of these machines are basically the same, allowing you to cut any true type font you have on your computer. The Wishbone is the most expensive of the three, but it does come with extra designs and software. Your design possibilities are wide open with any of these machines. If you have trouble learning exactly how to operate the system, there are support groups online where you can find experienced crafters willing to help. You can also store your designs online or e-mail them to friends. Of course, these machines are more expensive than stand alone or manual machines.

Which cutting machine is best for you?

Now you must decide which cutting machine is the best match for your requirements. Do your research and be honest with yourself. How much are you willing to invest? How much time do you have to use your machine? Will it be too difficult for you to learn the techniques of the more sophisticated models? Will buying individual dies or cartridges restrict your creativity and cost more in the long run than a bigger up front investment? Once you answer these questions, you will be better prepared to choose a cutting machine that will best suit your personal needs.

Source by Sammy Deortha

Learning to Play Poker the Proper Way

machine learning articles


Are you looking to get started playing poker? To rise through the ranks until you finally conquer the fabled final table of The World Series of Poker Main Event? Well, all I can say is easy there. Small steps, my friend. Remember, slow and steady wins the race!

The fact is that it can cost you, the novice poker player, a lot of money if you start playing and learning poker the wrong way. Because, there is such a thing as learning the wrong way. This article will give you some points and tips on the best way to get started. A few pitfalls, things to avoid, will also be mentioned. But, first, let us talk a little about patience.

Rome Was not Build in a Day

In poker, remaining patient is crucial in numerous ways. In the learning process, as you slowly improve your skills and theoretical knowledge, it is important not to get carried away. When you watch the top professionals, always remember that they did not get there overnight. They, literally, played millions of hands to get where they are. You will not become a top player overnight. It takes time and effort!

Another point is the swings. You have to stay calm. Some days you will get all the right cards at all the right times, and you will win big. Other days, you will not receive any of the right cards at any of the right times, and you will lose big. For the inexperienced player, this can easily be mistaken for playing great or playing lousy, and not just as the stroke of good fortune / misfortune that it actually is. Always keep it in the back of your head, that one good night does not make you an all pro, just as one bad night does not make you a "donkey". Instead, when you are learning how to play, focus on whether you made the right decisions. In the long run, making the right decisions is what will make you a successful player.

Where to Start When You Want to Learn to Play Poker Well

When you want to learn to play poker well, you need to focus on two aspects. Theoretical knowledge and practice. You need both, as the theoretical knowledge can not replace actual experience at the table, and experience at the table will not do you any good, if you do not understand the right and the wrong moves.

Theoretical Knowledge

Theoretical knowledge can be obtained many places these days. There are poker sites, poker forums, and video tutorials to name some examples. Still, picking up a book by a competent poker writer might be your best bet. Personally, I have always recommended David Sklansky. He has written several books, but, obviously, you should select one aimed at beginners.

After reading, and re-reading, a few beginner's books. Move on to books covering more advanced subjects, and start visiting the various poker sites, forums, and video tutorials. A concept crucible to keep in mind, is that anyone can dole out advice. Anyone can start a poker site or write a book. Do not take any advice you receive to be the end all of the discussion. Always remain critical and ponder if what is being told is logical. You will find a lot of useful and thoughtful advice, but, unfortunately, you will also find plenty of garbage.

Experience and Practice

Now, all the knowledge in the world will not help you, if the minute you face adversity at the table you lose your head. You will be surprised by the extend to which money can influence your state of mind. To become a great player, you will have to spend countless hours practicing. Certain concepts, such as making quick, thoughtful decisions, as well as staying calm, can only be learned through practice.

Taking Advantage of Bonus Offers

When you start out playing and gaining experience, you might not be a winning player. You might be a break even or maybe even losing player. Luckily, there is a way to avoid losing money, while you hone your skills and turn yourself into a winning player. The way to do this is by taking advantage of the generous bonus offers found online. As an example, Full Tilt Poker offers up $ 600 in bonus on your first deposit. Meaning you could lose $ 600 playing the first few months and still break even. In fact, the competition at the lowest stakes is so soft, even total beginners can be break even players, meaning you would make a profit of $ 600.

Poker is a challenging and fun game. It can also be very profitable. It is not a get rich quick scheme, you need to put in the effort to become a good player. If you work hard, however, and you enjoy a challenge, soon you should be playing winning, profitable poker.

Source by Thomas Nielsen

Jamorama Acoustic Guitar Course – Is It The Best?

Free Technical Stuff


Ben Edwards a master guitarist has produced yet another great online guitar course for those just beginning. The previous course known as Jamorama was designed to help you learn how to play the electric guitar, but the recently released course known as Jamorama Acoustic Guitar Course enables you to learn how to play this particular instrument.

Today when searching for online guitar courses you will find that there are several different ones to choose from. But of all them the original course designed by Ben Edwards is still one that many people prefer to use even though it has been around for several years now. Even though Ben has now introduced his new course which can help you learn to play the acoustic guitar it still contains the same high quality material and information that the original course had to offer.

The Jamorama Acoustic Guitar course consists of 2 books and 153 video lessons which are quick and easy to download from the internet. It is through these books and videos that you will learn the techniques that will enable you to play the acoustic guitar more competently. But as well as the lessons along the way Ben provides tips and tricks which can further enhance your playing skills and which help you to learning to play the instrument much more quickly.

Although there are plenty of other online guitar courses to choose form there are certain things within the ones devised by Ben Edwards which sets them apart from the others. As well as the books and video lessons, Ben provides an integrated learning kit which consists of games and jamming sessions. It is these additional benefits which assist in making the whole process of practice and learning to play the guitar much more fun. Because you find yourself enjoying your practice sessions more you find that you are actually learning a lot more quickly as well.

As previously mentioned the games that Ben has included in this course make it a much more pleasurable experience for you, especially when you are only just learning how to play it. Also these games have been developed by a professional and will become invaluable to you as you skills develop further, especially when you want to improve on your key skills. It is these games and other resources within the course which can turn you into a far more competent and confident guitar player.

The one thing which makes this particular online course stand out from all the others that are available is that you can email and talk with Ben at any time for free. This is particular encouraging for a beginner as they know that they have support which is just a click of the mouse away. Although all the other courses available online are good, there are none which offer the same kind of support as this one does.

Another benefit of taking this online guitar course over the many others now available on the internet is that it is extremely easy and simple to use and understand. This is because Ben Edwards has chosen to concentrate less on the theory side of learning to play the guitar and more on the practical. But even so you will still learn about how to read guitar tabs, you just won’t find yourself becoming confused and bewildered by information that you can not understand.

If you are really interested in learning to play the acoustic guitar using an online course then you should be taking a serious look at what Ben Edward’s Jamorama Acoustic Guitar course has to offer. As previously mentioned there are plenty of other courses which are available online today, but very few of them have the same benefits and additional features that this one has.

Source by Allison Thompson

Best Distance Learning Engineering Programs

Free Technical Stuff


Engineering is a career field of applying science and mathematics to provide solutions that have a practical end. Engineers design and manufacture machines, systems and even economical structures. It is one of the largest professions in the US which employs more than a billion professionals. Engineering is one of the major professions whose requirements have constantly been high and will increase further in next few years.

There is a great deal of prestige involved with being an engineer. It is a highly rewarding career and famous due to the prestige, positive job outlook, and higher salary in comparison to any other profession. Often responsible for creating a new product or service, engineers are always in constant high demand in the corporate world. They may be employed in factories, industries, software development sectors, and almost everywhere else. Besides this, these days many engineers also work as production or process engineers that include various areas like development, testing, and maintenance of a specific system.

If you are an innovative person and like to take challenges, then engineering may be just the ideal career option for you. At present there are numerous online engineering degrees and distance learning engineering programs that are being offered from leading universities. The important point to note is that when it comes to engineering, there are enough specialties to choose from. As a result, selecting a proper distance learning engineering program matters more and can be vital factor for successful career in engineering. Here, are some of the few engineering programs or engineering specializations that you can choose –

Electrical Engineering:

Graduates in electrical engineering have great career opportunities in companies for installation, operation and maintenance of electronics equipments and systems. Nowadays, it is considered to be the largest field of engineering, where engineers are primarily involved in designing everything from consumer electronics to large scale communications systems or electronic equipments. Earning a degree in electrical engineering can let you work in Defense, Space and other large research organizations as they employ electrical engineers in design of complex devices and systems for signal processing. In addition, you can also work in companies involved in design and fabrication of devices or integrated circuits.

Civil Engineering:

Graduates in civil engineering apply science to the planning, design, construction, operation, and management of public works. Civil engineering is one of the broadest of the engineering disciplines, extending across many technical specialties. Working as a civil engineer, you will be responsible for planning and designing a project, constructing the project to the required scale, and maintenance of the product. It is the ideal career for you if you enjoy working with people to meet and address the infrastructure or development challenges of the past, present and future.

Environmental Engineering:

It is an engineering program primarily concerned with the conservation of environment at local or international level. This engineering program actually lets you find employment in a variety of organizations including engineering consulting firms, manufacturing companies, and federal, state, and local governments. Working as an environmental engineer, you will conduct hazardous-waste management studies in which you are required to evaluate the significance of the hazard, offer analysis on treatment and containment, and develop regulations to prevent mishaps. You will also be involved in water and air pollution control, recycling, waste disposal, and public health issues.

Computer Network Engineering:

Selecting a distance learning computer network engineering program lets you learn essential skills and knowledge in a vast assortment of computer applications, and troubleshooting methods. Some of the key studies included in computer network engineering programs are in-depth instruction in Microsoft Windows Network and Desktop Operating Systems, along with the installation and configuration of world-wide computer networks, network security, computer network wiring, and many more other networking activities.

Graduates in computer network engineering can expect to make their career in different service organizations like public utilities, banks, airlines and commercial organizations as well. Apart from this, today as more firms in every sector of the economy are getting computerized every year, the requirement for engineers done specialization in computer networking is expected to increase further.

These are some of the best distance learning engineering programs that can help you enjoy the right career-path. Today engineering is definitely a profession that can put you at an advantage and enjoy a better salary and job security.

Source by Amit Kothial

Hazard Control Methods

machine learning articles


Hazard Elimination

Hazard elimination is the process of removing hazards completely from workplaces. The hazards are not present anymore, that's why hazard elimination is the most effective method in controlling hazard. Whenever possible use this method to control hazards. An example of hazard elimination is to design a low-temperature and pressure reaction conditions instead of the high-temperature and pressure condition. High temperature hazard is completely removed and over-pressure condition will no longer exist. Another example of this is using automatic mode operation rather than manual operation. So that hazards that are associated with manual operation removed to zero level. Elimination of hazards is usually performed at the design or preparation phase and implemented at the source of hazards.

Hazard reduction

Hazard reduction is the effort to reduce or lessen hazard level from the workplaces to an acceptable level. In this case hazards are still present. It is generally chosen when hazard hazard elimination is not feasible. Hazard reduction is implemented during the design phase and in some cases as a result of evaluation on the existing equipment, jobs, tasks or activities. An example of this is to substitute a hazardous chemical with a less hazardous chemical.

Engineering control

Including in engineering control are isolation, ventilation, containment and process control. Engineering control deals with the design of workplaces and their related processes. Isolation of the hazards may come in the form of machine guard, blast shield, welding curtains and hot surface insulation. Exhaust fan that removes catalyst dust and hazardous chemical vapor from a building is an example of hazard control by ventilation, where at the same adds fresh air into that building. Another example of ventilation is fume hood inside laboratory room.

In case of containment, hazards are enclosed by using enclosed cabs, enclosing noise equipment, providing a noise-insulated work booth and installation of silencer at the discharge pipe of a compressor. Process control is the most common hazard control method in chemical plant operation, such as isolation by interlock and safety valve to prevent over pressure.

Administrative control

Administrative control is selected when elimination and substitution is not feasible, and engineering control could not provide adequate control on hazards. Typical examples of administrative controls are provisions of operation procedures, safety signs, safety talks, setting up new safety policies, scheduling working hour to limit exposure to the hazard, implementing job rotation, work permits, alerts and training.

Personal Protective Equipment

Personal protective equipment provides a barrier between workers and the chemical, material, hot surface or noise. As I mentioned in my previous post about personal protective equipment video, it includes respirators, goggles, hand gloves, face shields, hard hat, ear plug and footwear. Personal protective equipment shall be used when hazard elimination, reduction and engineering control are not feasible, and the administrative control could not provide sufficient additional safety protection. The above hazard control methods can be applied in combination in order to provide the most effective hazard control.

Source by Lukman Nulhakiem

CNC Machinists School

Free Technical Stuff


There are specialty schools available that offer nothing but training for machinists on CNC machines; however, many times machinists can be trained through high school programs, trade schools, voluntary schools or community colleges. CNC machinists can also be trained as an apprentice and through on the job training.

CNC machinist's schools offer their students training on a variety of different CNC machines. Not only will the students learn about different machines and how to operate them, the basics of CNC machines will be taught.

To completely understand how the CNC machines work, one must understand the type of technology that they are designed upon. The machines work on different axes and these axes is what allows them to be as precise and intricate as some of the CNC machines can be. Some machines can perform to an accuracy level of 20 millionths and students must understand how this is possible.

The robotic technology can be difficult to learn and not all people can understand this type of technology and the theory behind it. It is necessary that the educated machinists come from an educational background that is strong, even in the high school level. Mathematics is a strong part of the theory that is associated with the CNC machines. Subjects like geometry and decimals are very important with this technology.

Students will also learn how the software programs work in relation to the CNC machines themselves. The computer software program is what tells the machine what to do and if it is written wrong, the final product will not be what is desired. One must understand the language of the code that the program should be written in, how to write the code to tell the different axes what to do and so on. Student's will be explained this process because as an operator, they may be required to fix "glitches" in the code and get the machine back up and running like it should.

Students will also learn how to service the machines. Proper maintenance is a definite required aspect with the CNC machines. Failure to maintain these machines properly will affect their accuracy and accuracy levels. New machines will usually come with service contracts; however, daily maintenance and upkeep will still be required.

There is so much to learn about these machines. There is such a variety of the CNC machines that learning how to run each and every one may be impossible; however, the basics are the same with every one of them. Students will learn the basics to help get them started in the industry. Most of the time, one will start out as an entry level operator and through time and experience, they will gradually work their way up to the more experienced operator levels and with this comes more responsibility.

To find a CNC machinist school, perform a search on the internet or contact your local college and the guidance counselors will probably be able to help you locate the one that is right for you.

Source by Ivan Irons

Understand the Complete Process of Fabrication – Steel Structure

machine learning articles


Fabrication steel structure is the latest trend that is most widely used in construction construction industry today. In fabrication of steel structure, we need a practical understanding of steel materials, the processes and practices of welding, cutting and forming, and weld testing and quality control. This knowledge is essential if fabricated steel structures are to be economic, practical and fit-for-purpose.

The best way of ensuring a good result in the process of fabrication is the selection of qualified and experienced stainless steel fabricator. A look at the fabricator's workshop and examples of previous work carried out using stainless steel will give the architect or contractor a prerequisite idea of ​​the level of quality to which the fabricator can work. And about Stainless steel it is not more difficult to cut, form and join than other metallic materials and these small differences is the key to success for fabrication steel structure.

Architects specify stainless steel for its excellent corrosion resistance as well as for its visual qualities. Good fabrication is essential to maintain both these features. Another important thing for fabrication steel structure is approved shop drawings because for fabricator it is very important to begin fabrication after receiving approved shop drawings. The Fabricator must understand that work done without approved shop drawings may have to be changed based on final, approved shop drawings. Work done without approved drawings should be covered by subsequent work.

Other important thing for successful fabrication work is effective communication between the Owner, the Fabricator, and the Contractor. Before starting of project work these three should create the simplest, most direct lines of possible communication and make sure that all of them understand and use them. This is called pre-fabrication meeting and it's an important function of these whole process. And in the end of this you can say that economy of fabrication steel structure will improve day by day because fabricators do not have to change their methods and production variables from state to state.

Source by Steve Jack

The Top 10 Best Bets in the Casino

Free Technical Stuff


Whether you are gambling in the lights of Vegas or at home with a coffee and your computer casinos, the games they offer are very similar. All games offered will hold a house advantage. This means that in the long run, the house will always win. The house edge works like this – if you flip a coin, the odds of it coming up heads is 50%. So if you bet $ 1 on it you would expect to get $ 2 back. However, a casino will pay you less than this, maybe $ 0.95. In this case the house edge is 2.5%.

The house edge is the difference between the true odds and the odds that the casino offers. Each game will offer different bets and each bet will offer different odds and a different house edge. Obviously if you fancy leaving the casino with more money than you arrived with then it is advisable to stick with the bets that offer the lowest house edge. It is possible to come on top if you stick to strategy, have a bit of luck on your side and, of course, pick the right bets to take. Below is a list of the 10 games and 10 bets that offer you the best chance of winning.

1. Poker – This is the obvious one. Firstly, poker has a large element of skill in it which, if you are good, will greatly swing the odds in your favor. However, more importantly you are not playing the house. Poker is played against other players not the house and since the house has no edge. They make their money from taking a percentage of the pot from each round.

2. Video poker – Video poker is a game that involves a large degree of skill and hence you can improve your chances by practicing and learning how to play correctly. Most machines give the house an advantage of less than 0.5% and some even have a 0% house advantage. This will obviously vary from machine to machine so check before you play.

3. Baccarat – Baccarat offers two bets with a low house advantage but the best one is the bet on the banker. A bet on the banker offers a house advantage of just 1.06%.

4. Baccarat – A bet on the player gives the house a 1.24% advantage. The player and the banker are the bets to take NEVER bet on the tie, it's know as the 'suckers bet' as the house edge is 14.4%

5. Craps – Craps offer some good bets that are worth looking at. Betting on the 6 or the 8 is a good bet with a house advantage of 1.52%. Aside from the 7 the 6 and the 8 are the most likely numbers to be roled.

6. Craps – Craps pass line / do not pass line bets offer good value. The pass line bet offers a house edge of 1.41% and the do not pass line bet offers a house edge of just 1.14%. However, with the do not pass line bet you are betting against the shooter which may not go down well at a land casino as you will be winning when everyone else is losing.

7. Craps – Odds bets. These bets offer a house edge of zero. All bets of this type are paid at true the true odds.

8. Blackjack – If you follow 'basic strategy' for blackjack then the house edge is reduced to less than 1%. This will vary slightly depending on how many decks the casino is using. Basic strategy involves basing your betting on a strict set of mathematical rules.

9. Blackjack – Card counting. First up it's important to note that card counting is NOT illegal. However it is frowned upon by casinos and if you're not careful then you may be asked to leave or they will simply start shuffling the deck after every hand. In online casinos the deck IS shuffled after every hand so you can not count cards online. By learning to count cards you can actually give yourself a 2% edge over the house.

10. Pai Gow – When playing Pai Gow you can chose to act as the banker. You will pay a 5% commission to the house if you win (this is not the same as the house edge). You will win the money of players you beat so if you have the skills you can come out on top.

Many people will claim that games are fixed and online casinos are a scam. This is nonsense. Casino games are not fixed, nor do they need to be fixed. The house, and every casino game, will always give the house an advantage. It is possible to come out on top and many people do but you do have to have a little bit of luck on your side.

Source by David Whitmarsh

Page 1 of 121 2 3 12

%d bloggers like this: